| Weight | 2.5 lbs |
|---|---|
| Weight | 2.5 lbs |
| Quantity | Single |
Moss Rouge – Platinum / Polishing Compound
$14.05
- Platinum Rouge
- This “Jeweler’s Rouge” was designed for very fine coloring.
- Use with the Second Cut Wheels for a mirror shine.
- For aluminum and stainless.
In stock
Additional information
Related products
Drill Adaptor for 1/4” & 3/8” Chuck
- Used with Cotton Buffs 6″ and smaller with 1/2” & 5/8” arbor hole
- Connects these Cotton Buffs to your High speed drill
- Drill Adaptor for 1/4” & 3/8” Chuck
10″ Smooth Kut Polishing Wheel (Joker) 20Ply
Here is another newly developed Signature Series wheel SMOOTH KUT This is a Secondary Cutting wheel nicknamed the JOKER.
- 20 Ply
- Use with Moss Green Platinum rouge for aluminum
- Use with Moss Green or White Lightning Platinum rouge bars for Stainless
- 10″ Dual Density Polishing Wheel
10″ Satin Airway Buffing Wheel
- Use these for medium surface preparation.
- Prep welds on fuel tanks
- Use with Coloring Bar for a nice satin finish
10″ Yellow 1 on 1 #4 Fast Cut Airway 16Ply
- Primary Cutting,Yellow/Orange combo wheel
- Mill Treated cloth for aluminum and stainless steel
- 5/8″ arbor hole – 10″ wheel
- Suggested rouge bars: Tripoli, Green Chrome, 87 Stainless
10″ Buff & Blend Surface Prep Disc
- This quick surface prep disc will cut your sanding time in half. Use instead of your early sanding steps, then go to our Satin airway before polishing
- Zephyr’s Buff & Blend 10″ 2-PLY Disc
- Use to take off tar and cement off metal
Airway Buff Safety Flange Set
These innovative Flanges are molded from High-Density Composite Nylon and Kevlar reinforced. Lightweight, yet as strong as aluminum! To be attached to each side of Zephyr Airway Buffs For use with 8″ and 10″ airway wheels with 3″ center plates, 5/8″ arbor hole MANDATORY FOR USE WITH ALL AIRWAY BUFFING WHEELS
White Lightning Rouge – Platinum / Polishing Compound
- Platinum Series Rouge
- This rouge was designed for Stainless Steel
- Use with our Cotton Buffs and Joker wheel.
12″ Orange Airway 4 Mill Treat 16Ply
- 16 Ply
- 3 inch center
- Primary Cutting
- Mill Treated cloth for aluminum and stainless steel
- 5/8″ arbor hole – 12″ wheel
- Suggested rouge bars: Brown Tripoli, Moss Green, 87 Stainless
- Used to buff 22.5 rims mounted on truck